Contact person: Lisa Kang
Email: lisa@shuanglinrubber.com
We can provide various specifications of swelling rubber waterstop according to the customers' requirements.
Rongwei rubber ,your best choice of businees partner for
swelling rubber waterstop.
Description of swelling rubber waterstop:
Rubber Water stop is a special type of hydraulic cement. It is non-corrosive, non-rusting, instantly setting compound for plugging and stopping water or fluid leaks in concrete structures or masonry surfaces.
When mixed with plain water to a thick consistency and hand formed into a plug, it will stop flowing or leaking even under water pressure.
Installation of swelling rubber waterstop:
Most popular way of the placement of the water stop seal is tied to the steel frame works or small eyelet by means of small wires, certain metal clamps made to grip the water stop seal to keep it in proper position. Our waterstops are profiles based on specially formulated plasticized PVC compound, which are designed to meet specific requirement of building industry. It is essential that a device is used against potential risk of discomfiture that tends to be caused in concrete structure following climatic, geo-disturbances and frictional impasse which result in expansion or contraction in concrete structure. And the expansion or contraction results in leakage/seepage of water exposing the structure to bring the risk of cracks or dismemberment.
Applications of swelling rubber waterstop:
Rubber Water stop is widely used in underground installation, tunnel and culvert, impounding reservoir, metro, and retaining dam and so on.
Features of our swelling rubber waterstop:
1. The Rubber Water stop strip will expand when getting in touch with water, so allowing it to come into closer contact with the concrete, creating a better water-stop result.
2. Different thicknesses structure of Rubber Water stop is adopted for the cross section, which is divided into the high-strength area, the waterproof area and the installation area, allowing for uniform and reasonable stress for all portions.
3. There is installing hole at installation area of Rubber Water stop, it could facilitate fixed with adjacent reinforced, and not produce shifting. Construction of our Rubber Water stop is convenient, positioning installation is firm.
Types of swelling rubber waterstop:
1. Common Rubber Waterstop
2. Swellable Rubber Waterstops/Hydrophilic Rubber Waterstop belt
3. Rubber Waterstop with Steel Side
Physical property
|
Items
|
index
|
|
B
|
S
|
J
|
|
1. Hardness ( Shore A )
|
60±5
|
60±5
|
60±5
|
|
2.Tensile strength ,MPa ≥
|
15
|
12
|
10
|
|
3.Elongation at break , % ≥
|
380
|
380
|
300
|
|
4.Compression set %
|
70ºC×24h,% ≤
|
35
|
35
|
35
|
|
23ºC×168h,% ≤
|
20
|
20
|
20
|
|
5.Tear strength,KN/m ≥
|
30
|
25
|
25
|
|
6.Brittleness temperature,°C ≤
|
-45
|
-40
|
-40
|
|
7.Air aging
|
70ºC×168h
|
Hardness ( Shore A ) ≤
|
8
|
8
|
--
|
|
Tensile strength,MPa ≥
|
12
|
10
|
|
Elongation at break , % ≥
|
300
|
300
|
|
100ºC×168h
|
Hardness ( Shore A ) ≤
|
--
|
--
|
8
|
|
Tensile strength, MPa ≥
|
9
|
|
Elongation at break , % ≥
|
250
|
|
8. Resistance ozone ageing 50pphm: 20%, 48h
|
2grade
|
2 grade
|
0 grade
|
|
9. Adhesion of rubber to metal
|
With contact section in elastomer
|
Notes:
(1) Adhesion of rubber to metal is used to the rubber water stop with steel edge.
(2) If there are other special requirements, it could add inspection items properly after making deal by both sides. When as users’ requirements to check mildew test according to the circumstances, the mildew proof property must be equal to or over Grade 2.
